Gravimetric Contaminant Testing Flow Chart

As I was writing the recent post about gravimetric Millipore testing it occurred to me that I was trying to boil a good-sized part of a 180+ page document into 500 or so words.  It also occurred to me that many people don’t have the time for or interest in reading endless pages of specifications …

Millipore Testing – Gravimetric

Millipore testing is all about evaluating cleanliness based on the presence of particles or other solid, non-soluble contaminants.  In general, it can not be used to detect the presence of hydrocarbons or other contaminants which will be solubilized in the extraction process.  The results of Millipore testing are generally expressed by weight using gravimetric analysis …

Millipore Specifications Update – Extraction and Sample Preparation

“Millipore” testing evaluates cleanliness by extracting particulate contamination from a surface and then either weighing or counting and quantifying the collected particles to assess the cleanliness achieved by a prior cleaning means.  The first step in either case is to collect and prepare for analysis any particulate residue remaining on the surface after pervious cleaning.  …

Foil Test – Foil Variabilities

It would make sense that variations in the aluminum foil used for testing in the foil test for ultrasonic performance could have a bearing on the outcome of the test.  Most people use standard “grocery store” aluminum foil for testing because it is inexpensive and widely available.  So let’s talk about that first.  The most …

Millipore Testing – Help!

I just spent a couple of hours re-reading several of the ISO specifications related to “Millipore” testing including ISO16232-3 and -7.   I put the word Millipore in quotes here because although these are normally called Millipore specifications, none of them mentions the word Millipore.  (Millipore happens to be the name of a company that developed …

Aluminum Foil Test for Ultrasonic Performance – Potential Problems

Task At Hand – In a previous blog I declared that I am not a fan of the aluminum foil test for evaluating ultrasonic performance.  I question its validity and relevance on a number of fronts.  If my purpose here is to question my own skepticism, then I guess I should probably define the factors …

How Much Chemistry – Liquid

Using the right amount of chemistry is important to successful industrial cleaning.  Since there is no standard convention for expressing the amount of chemistry to use, it sometimes takes a little effort to sort things out.  Chemistry is supplied in either liquid or powder form with several different conventions for each.  Let’s look at liquids …

Hot Air Drying – Tips and Pitfalls

Drying is the last and often a critical part of a cleaning process.  In many cases it is also the most time and energy consuming.  It is often the most difficult part of the process to specify and control.  Although there are several drying technologies available, blowing with hot air is simple and by far …

Stainless Steel Compatibility

With its well-deserved credentials for chemical resistance and durability, stainless steel and particularly 316 grade stainless steel is a “go to” for the fabrication of ultrasonic cleaning tanks.  Although it performs well in most applications, there are still those where stainless steel has its limitations.  Stainless steel achieves its “stainless” characteristic by developing a very …